CoreHog™
Technical resources for metal tools menu
Metal material cutting tool

Technical Resources

Speeds and Feeds
for Metal Tools

Application Types For Regular Style End Mills

Recommendations

Ramping—A 3° ramping angle is recommended

Helical Interpolation—A 3°–5° ramping angle is recommended *Preferred method over ramping.

Engaging—A “Roll-In” engagement is preferred over a “Straight-In” engagement.

Corners—A feedrate reduction of at least 20% is recommended.

Deep Pocket Milling—Use reduced neck tool with a shorter length of cut.

Tall Wall Milling—Use reduced neck tool with a shorter length of cut.

© COPYRIGHT 2015 COREHOG™ | DISCLAIMER

CoreHog™ logo